2 CHOICE OF A JACKET By default: no jacket on the cylinder. The jacket references below must be paired with a tank. M1 and NC flexible jackets are supplied unmounted. The M0 steel jacket is delivered mounted. The jackets will be pre-cut at the factory according to the openings selected in step 3. Models Flexible M1 100 mm Flexible TOP NC 100 mm Steel M0 100 mm Heat loss tank UA* (w/k) Ref. Heat loss tank Ua* (w/k) Ref. Heat loss tank Ua* (w/k) Ref. 500 1.380 083 072 1.546 083 086 1.218 083 002 750 1.759 083 073 1.972 083 087 1.553 083 003 900 2.046 083 155 2.296 083 156 1.807 083 004 1000 2.157 083 074 2.417 083 088 1.905 083 005 1000 TB 2.213 083 075 2.481 083 089 1.954 083 006 1 500 2.593 083 183 2.907 083 184 2.289 083 007 1 500 TB 2.898 083 077 3.241 083 091 2.559 083 008 2 000 3.296 083 078 3.685 083 092 2.910 083 009 2 500 3.722 083 079 4.167 083 093 3.286 083 010 2 500 TB 4.028 083 080 4.509 083 094 3.556 083 011 3 000 4.231 083 081 4.741 083 095 3.736 083 012 3000 TB 4.352 083 082 4.889 083 096 3.842 083 013 4000 5.307 083 083 5.962 083 097 4.685 083 014 5000 6.484 083 084 7.284 083 098 5.724 083 015 To find out the heat loss corresponding to your configuration, add the value associated with the tank capacity and the value(s) associated with the openings (flanges and/or manhole) selected. Openings Heat loss Ua* (W/K) Flexible M1 100 mm Flexible TOP NC 100 mm Steel M0 Flange 0.093 0.093 0.093 Manhole 0.269 0.269 0.269 * Storage temperature at 65°C - Room temperature at 20°C. Values determined according to RE2020. TM0 TOP NC Flexible M1 C A+ F 500 L model MADE IN FRANCE HOT WATER STORAGE CALORIFIERS 67
RkJQdWJsaXNoZXIy NTAwMTk1